- Full-face Mask: Pneumatic rebound silicone cushion, high airtightness, soft and non-marking. While reducing facial pressure and discomfort, it enhances facial fit and makes wearing more durable. Ultra-light and durable frame is used to ensure that the mask is attached to the face and stable while adapting to the wearer's hyperactive sleep. Honeycomb vent design, multi-hole exhaust, reduce the intensity of airflow flushing, more quiet sleep.
- Headgear: Soft and lightweight headgear with soft skin-friendly fabric, lightweight and stable. Velcro structure, easy to adjust, help wearers adapt as soon as possible, comfortable to sleep.
- 360° Rotating Elbow: Ensure comfort while increasing freedom, not limited to fixed position.
- Applicable Machines Models: Universal mask. Suitable for machines with a tube diameter of 22mm(0.87 inch).
- Package Included: Including Full-face Mask, Buckle x 2, Headgear, Stopple and Transparent Cover. Sealed bag, no assembly required. 30 seconds to wear quickly, just snap the buckle, pull the headgear tight, sleep position freely.
Full-face Mask Accessories:
- 360° Rotating Elbow: Flexible positioning of tube direction, increasing the wearer's freedom
- Anti-blocking Micro Vent: Decentralized design, smoother breathing
- Pneumatic Rebound Silicone Cushion: Soft silicone, double-layer structure design, high airtightness, easy to clean. New upgrade, smaller contact area, more open view
- One Mask for Two Uses: The mask can be connected to an oxygen cannula
How to Wear:
1. Put the mask over your nose/mouth area and pull the headgear over your head
2. Connect the clips to the frame. Adjust the upper headgear straps until it feels firm and comfortable
3. Repeat step 2 with the lower headgear straps
4. For best comfort, leave a space wide enough to allow two fingers to pass
5. Connect the tubing to the swivel
6. Connect the other end of the tubing to the machine
How to Clean and Maintain:
1. Hand wash all parts of the mask with warm soapy water and air dry in an environment that is protected from direct sunlight
2. Clean the air vents with a soft brush
3. To obtain a better mask sealing effect, each time the mask after use, should be cleaned mask silicone pad on the skin exuded oil
Note: Do not use aromatic solutions, bleach, alcohol or harsh-smelling products to clean the nasal mask components. If not rinsed thoroughly, residual vapors from these cleaners may be inhaled by the wearer and may even damage the mask